Wednesday, December 30, 2009
Monday, December 28, 2009
Tuesday, December 15, 2009
It was a bit difficult to find a high quality 3/32" non-chamfered single speed chain for track bikes using 3/32" drive train or single speed mountain bikes. KMC created the D202 Devil chain; sibling to the D101 1/8" version, the 202 should prove to be a high quality 3/32" drive solution.
New riser bars from Sinz just in, alloy straight wall construction, 22.2 clamp, available in a few colors and a reasonable price.
Friday, December 11, 2009
MKE Bike Polo rider Eric Kremin made good use of the Problem Solvers Cable Doubler. He wanted to have one lever actuate both calipers during his polo matches and this did the trick. He has it setup so the rear locks up before the front for super quick stops and the use of a v-brake noodle on the front caliper allowed him to easily disassemble the front fork for travel. Nice work Eric!
We just received a couple of the new True 3/8th Profile fix/fix hubsets in. 3/8"(10mm) fixing bolt with steel serrated washer to keep you wheel from slippin. They are out of stock of many colors right now, as Profile gets more made, we'll get them in our store for you.
In addition to the hubsets, we received some True 3/8th axle conversion kits to transform your old hubs to the new larger bolt.
Gotta love these hubs!!!
Over the last few years, biking to work and for leisure has become an important lifestyle for many people in Milwaukee and Madison, Wis...
Biking has become hip in recent years, with more bike stores popping up around the country. In a push to minimize emissions from the a...
Photo by Map Cycles So, one of my personal favorite handlebar is the Arc Bar . It puts you a little upright so it's a chill position ...